Skip to content

Mgmt‑Interface

hint{type=“warning”} NOTE: Use operation=“create” to add a new IP address to the management interface (this operation will remove old mgmt ip).

If you want to modify an mgmt ip’s gwaddr, use operation=“merge” instead.

Request example to create a new IP address on the management interface via edit-config

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:c7801c02-0c5c-4515-b8dd-453fd1e105d4">
<config><top>
<mgmt-interfaces>
<mgmt-interface>
<name>eth0</name>
<address operation="create">
<ip-prefix>192.168.122.42/24</ip-prefix>
<gwaddr>192.168.122.1</gwaddr>
</address>
</mgmt-interface>
</mgmt-interfaces>
</top></config>
</rpc-reply>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:ee0561f1-8170-427c-a5f5-7c6ffbfc309d">
<ok/>
</rpc-reply>

Get MGMT Interface via RPC show-interface-mgmt

Section titled “Get MGMT Interface via RPC show-interface-mgmt”

Request example to retrieves the current management interface VRF status via show-interface-mgmt

<show-interface-mgmt/>

Response example

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:8a94da11-87a0-4394-a6a9-aba2208ac361">
<data xmlns="http://asterfusion.com/ns/yang/asternos-mgmt-interface">
MGMT_VRF_CONFIG is not present.
ManagementVRF : Disabled
MGMT_VRF_CONFIG is not present.
ManagementVRF : Disabled
</data>
</rpc-reply>