Syslog Configuration

此内容尚不支持你的语言。

syslog source-interface

[Command] **syslog source-interface {etherent|loopback} **interface-name no syslog source-interface

[Purpose] Configure the source interface for the device to send syslog packets

[Parameter]

Parameter	Description
{etherent\|loopback}	Specify the source as a service interface or a specific Loopback port

[View] System configuration view

[Use Cases]

sonic(config)# syslog source-interface loopback 0
Syslog source interface set to Loopback0
Restarting rsyslog-config service...
sonic(config)#

syslog

[Command] **syslog **ip-address **no syslog **ip-address

[Purpose] Specify the syslog server

[Parameter]

Parameter	Description
ip-address	IPv4 or IPv6 address

[View] System configuration view

[Usage Scenario] Syslog can be used to log messages locally in files or sent over the network to a syslog server. The syslog server can centrally store syslog messages from multiple devices.

[Use Cases]

sonic(config)# syslog 10.1.1.10